Detailed Product Description

Technical data: 

Our CA10VSO piston pump can interchange with A4VSO piston pump.

Fluid Prior to project design, please see our data sheets RE 90220 (mineral oil ) and RE 90221 (ecologically acceptable fluids) for detailed information on fluids and application conditions. When using ecologically acceptable fluids attention must be paid to possible limitations of the technical data. If necessary please contact us.Operating viscosity range For optimum efficiency and service life we recommend that the operating viscosity ( at oprating temperature ) be selected in the range νopt = opt. operating viscosity 16...36 mm2/s referred to tank temperature (open loop circuit). Limits of viscosity range. The following limits are valid for extreme operating conditions: νmin = 10 mm2/s short term (t ≤ 1 min) at a max. permissible oil temperature of 115 °C.Please note, that the max. fluid temperature of 115 °C is also not exceeded in certain areas (for instance bearing area). The temperature in the bearing area is approx. 5 K higher than average leakage fluid temperature. νmax = 1600 mm2/s short term (t ≤ 1 min) on cold start (tmin = p ≤ 30 bar, n ≤ 1000 min1, 40 °C). At temperatures between -25 °C and -40 °C special measures may be required for certain installation positions. Please contact us for further information. For detailed information on operation at very low temperatures see RE 90300-03-B. When operating at temperatures between +90 °C and 115 °C use FKM-seals (code designation V).

Features:

 Flange port SAE-UNC or SAE-metric;finished products divulging port;High driving speed;Good oil absorbency;Good noise;High power/weight proportion; Long using time;Short control time; Driving shaft can support axial and radial load; More variable types;Use in open driving shaft of multi-loop system.                                                                                                     

Specification: