Solenoid for explosion-isolated valve
| Place of Origin:China Zhejiang |
Online Postings: Products , Selling Leads
Country/Territory: China
Business Type: Trading Company, Buying Office, Agent
Number of Employees: 5 - 10 People
Attention:
1.The manual push rod at the end may be used during hydraulic system testing, with automatic reset functions.
2. For installation, use screws with a tensile strength of greater than 85kg/mm2 (Available at the time of purchase).
3. Inlet O-Ring must fully comply with Gb1325-76 Standards.
4. Remove the cover, tightenm it again after wiring to the base. There is a rubber ring at the cover wire entrance, when the threaded cover is tightened, wiring in the plug will be tightly clamped.
5. Cable must comply with explosion-proof requirements
Technical specification
Model | dMFZ-37-MA | dMFB-37-BT4 | DTBZ90FYC-MAI |
| Rated Voltage | DC:12V. 24V.48V | B:48V(Input Voltage:110VAC) B:99V(Input Voltage:220VAC) | DC:12V. 24V |
| Rated Travel (mm) | 2.8 | 2.8 | 4 |
| Toal Travel (mm) | 6 | 6 | <9 |
| Attraction Force (N) | ≥37 | ≥37 | >90 |
| Power (W) | 22 | 22 | 36 |
| Nominal Fluid Pressure (MPa) | 10 | 10 | 21 |
| Connection Dimension (mm) | φ19×3.5 | φ19×3.5 | φ32×3 |
| Installation Dimension (mm) | 35×35 | 35×35 | 49×49 |
| Application | Under-well or on-the- ground inflammable, explosive locations | On-ground inflammable, explosive locations | Pilots for proportional direction control valves, proportional press. control valves in explosive and inflammable locations |
Solenoid for explosion-isolated valve
Other Products from this Supplier
See more
Solenoid for explosion-isolated valve, hydraulic solenoid, solenoid products from this supplier.
